The line of swimming pool ceramics consists of modular trims in a nominal length of 200 mm (195 + 5 mm joint) and modular tiles from the PRO ARCHITECTURA range.Modular tiles are based on the basic module “M” (100 mm) and multiples thereof, plus smaller supplementary dimensions, e.g. 50 mm. The modular dimensions of our tiles and functional trims are derived from the factory dimensions plus the jointwidth. The smaller the tile/functional trim, the smaller the joint can be. The resulting modular dimension will not change. The small format tiles (10 x 10 cm, 5 x 5 cm and 2.5 x 2.5 cm) are supplied on ready-to-set sheets (30 x 50 cm). The sheets areavailable with the lattice paper attached on the front or back. For wet areas we recommend using tiles with lattice paper on the front only or with glass fibre lattice backing only. Lattice paper on front and glass fibre lattice backing must be specified when placing orders. Formats larger than 10 x 10 cm are supplied loose in the box.
All pool dimensions (rough shell and finished), fixtures, recesses for inlets and drains must be coordinated. The rough shell planning is made on the basis of the tile planning. The Villeroy & Boch tile planning service is free of charge.
Please contact your sales agent or the Planning Department directly, at
V & B Fliesen GmbH
Herr Marco Warschburger
Objektplanung - Technik + Gestaltung
Rotensteiner Weg
66663 Merzig
Tel.: +49 (0)6864 - 81 3245
Fax: +49 (0)6864 - 81 3592
E-Mail: warschburger.marco(at)villeroy-boch.de
