Group B III - Dry-pressed ceramic tiles and slabs with high water absorption E > 10%
The composition of the ceramicplus surface makes it much easier to clean. This, however, does not remove the need for cleaning.
Post-installation cleaning / basic cleaning
The cement film is reduced on ceramicplus tiles due to the reduced surface energy and the associated hydrophobic (water repellent) property.
Directly after jointing, cement film can be generally removed from nonvitreous and ceramicplus tiles with water. More stubborn residues of cement film can be removed using a weakly acidic cement film remover and a sponge or cloth. The cleaning agent should then be rinsed off with enough clear water until all traces of the basic cleaning agent have been completely removed.
Tiles bearing the symbol 
“precious metal plating, not scratchproof” should be cleaned with water and a neutral cleaning agent.
Routine cleaning
Type of dirt | Product and dosage | Procedure |
It is generally sufficient to clean with water and a soft or non-scratch sponge or cloth | ||
Normal degree of soiling, such as dust, light dirt | Neutral cleaning agent etc. Buzil G 481 Blitz-Citro
| Wipe the surfaces with a micro-fibre mop or cloth Dosage: 50ml / 10l cold water |
Lime scale deposits | Weakly acidic cleaning agent etc. Buzil G 463 Bucasan clear Dosage: 50ml / 10l cold water | Wipe the surfaces with a micro-fibre mop or cloth |
Grease, oils, waxes, cosmetics | Weakly alkaline cleaning agent etc. Buzil G 433 Activ Dosage: 50ml / 10l cold water | Wipe the surfaces with a micro-fibre mop or cloth |
