With the SINUS trims system, it is possible to design barrier-free shower trays in all sizes and layouts. Thanks to the low installation height of the overall design, the system is also suitable for use when renovating old buildings. Sinus can be used for the aesthetic design of all other transitions between floors and walls, as well as for the inside and outside corners in wall areas, storage areas and niches, and pre-wall installations.
This lends the room a more spacious look, with no change of material to break up the floor area. From a technical point of view, a homogeneous layer structure is produced.
The shower trays can be produced in two variants:
In lowered form. The transition is produced here with Z-shaped tiles leading into the shower tray, at a height difference of 10 mm.
With a 10 mm high threshold tile to form the border between the shower tray and floor. This variant is chosen when the overall height needs to be minimised - 10 mm does not represent a barrier.
The system ensures optimum hygienic conditions. Over time, the position of the elastic, closed joints 15 mm above the wet areas poses less stress on these joints. This results in considerable cost savings (cleaning and renewal) throughout the service life.
The modularity of the system and its assignment to the PRO ARCHITECTURA product and tile system also offers lots of design possibilities.
Thanks to the 10 cm basic grid, it is also possible to design sanitary rooms where space is particularly tight, such as are found in old buildings in particular, for maximum function.
